|
BIONICS BRACKISH AQUA-V-50 |
|
| INTRODUCTION |
|
Bionics Brackish Aqua-V-50 Series for desalination systems for brackish water are designed for feed water with a TDS (Total dissolved solids) less then 10000 ppm. Due to some new developments in membrane technology the Bionics Brackish Aqua V-50 ultra systems work with low pressure RO membranes (12 to 20 bars).
With systems as small as 250L/hr and up to 25 m3/hr we can treat most of the demands. The standard design has a pre filter, high pressure pump, Low Energy Reverse Osmosis Elements, Flow meters on permeate, concentrate and recycle stream, and is microprocessor controlled.
Optional, all systems can be equipped with a dosing system for antiscalants or biocides to protect the membranes against scaling or fouling. We also provide other pretreatment systems like multimedia filters, water softeners of de-ironing filters. In order to produce a product which meets the required water quality standards, commercial Reverse Osmosis systems must integrate various processing stages. The following chart describes these stages.
The equipment required for these various stages can be purchased "stand-alone", or separately, if needed. More usually, and more economically, we will supply an integrated, or "turnkey" system, in which the needed stages and equipment are pre-connected and tested.
|
| SYSTEM FEATURES |
|
Multimedia Filter
- Fiberglass tank pre filter with manual backwash valve to reduce particles to 25 micron.
- 20 & 5 micron cartridge pre filter to remove particulate matter (1 micron available).
- Filter housing design for easy filter change.
- Carbon filter to remove organics and chlorine.
Booster Pump
- Corrosion resistant booster pump of centrifugal design.
- Ensures positive water pressure to unit.
- Close coupled to totally enclosed motor to withstand saltwater environment.
Pressure Pump
- Positive displacement valve pump (systems 2000 gpd and below).
- Multistage 316 SS centrifugal pump driven by Crompton motor (systems above 2000 gpd).
- Pump head placed for easy service and inspection.
Reverse Osmosis Membrane - Pressure Vessel Assembly
- Spiral wound, polyamide, thin film composite reverse osmosis membrane.
- Representing state of the art technology.
- High water purity with membrane rejection of 98%+.
- Membrane is designed for long life with easy cleaning.
- Membrane is enclosed in pressure vessel with ratings to 600 psi.
- Easy to change end plug assembly with long life and durability.
- Forged high pressure fittings.
- High pressure components rated at 2 times maximum operating pressure
- For safety.
|
| Click for Technical Specification |
|
