|
 |
 |
| BIONICS ION SPECTRA INDUSTRIAL-6000 SERIES |
|
| INTRODUCTION |
|
Bionics Ion Spectra Industrial-6000 Series deionization systems are designed and manufactured for dependable service. Mineral tanks are constructed of corrosion-resistant fiberglass. Resin is a high quality polystyrene resin manufactured in the USA . Regenerations are initiated when a preset volume of water passes through a water meter. All regeneration controls are fully adjustable. The electronic control panel is protected by a NEMA 4 enclosure and operates on 120 vac. DI units can be custom-designed if the standard product line does not meet your required flow rate or other requirements. Both single and duplex train Auto DI units are available. The duplex train is capable of providing a continuous supply of deionized water. Neutralization and pretreatment systems are on hand to support the Automatic Deionizer.
Bionics Ion Spectra Industrial-6000 Series two-bed deionizers are designed for fully or semi-auto production of water with a conductivity of less than 10 micro-ohms and feature:
- trong acid cation and type 1 strong base anion resins as the standard, with other resins available as an option.
- Electromechanical/ Microprocessor based control system with conductivity monitor and flow sensor for regeneration initiation.
- Electrical enclosures are corrosion resistant fiberglass, which reduces maintenance costs.
- Resin vessels can be polyethylene-lined fiberglass or rubber-lined steel depending on size and customer requirements.
- ASTM code vessels.
- Factory assembly and skid mounting for quick installation and minimum startup cost.
- Schedule 80 PVC piping package including air operated composite plastic diaphragm valves is standard. Air or electric actuated ball or butterfly valves are available as an option.
- Pressure regulators, rotameters and metering valves supplied for accurate and safe control of regeneration water and chemical introduction.
- Internal distributors are corrosion resistant, designed for optimum efficiency and are fully supported where required.
- Automatic or Semi-automatic operation. Automatic regeneration when water quality falls below pre-set limit or after manual initiation.
- Constant monitoring of water quality.
- lid-state reliability control for trouble-free service
- No untreated by-pass water
- Alternate regeneration water source piping – standard
- Automatic shut down in the event of power failure
- Two-stage air mix standard Compact, non-corrosive components
- Steel tanks with rubber lining
- Convenient, modular construction
- Easy, economical installation
- Optional recirculation pumps
- Simultaneous regeneration and chemical displacement
- Brine kill option available for high purity systems
- Optional programmable purge prior to regeneration
- 2 volt operation (240V/60hz/1pH transformer included)
|
| Click Here for Technical Specification |
|
