|
 |
 |
|
| THE PROCESS EXPLAINATION |
|
Ultraviolet (UV) disinfection uses a UV light source, which is enclosed in a transparent protective sleeve. It is mounted so that water can pass through a flow chamber, and UV rays are admitted and absorbed into the stream. When ultraviolet energy is absorbed by the reproductive mechanisms of bacteria and viruses, the genetic material (DNA/RNA) is rearranged and they can no longer reproduce. They are therefore considered dead and the risk of disease has been eliminated.
UV-rays are energy-rich electromagnetic rays that are found in the natural spectrum of the sunlight. They are in the range of the invisible short wave light having a wavelength ranging from 100 to 400 nm (1 nanometre = 10-9m).
|
| STAGE 1 |
RAW WATER STRAINER
The feed water is filtered through a corrosion resistant mesh strainer to eliminate large objects, particles or suspended solids. |
| STAGE 2 |
PRIMARY PRE-FILTRATION
20 micron heavy duty polypropylene sediment filter with high capacity melt blown configuration |
| STAGE 3 |
SECONDARY PRE-FILTRATION
This stage includes a heavy duty sediment particle filter comprised of pleated polypropylene. The particle filter removes solids that are greater than 5 microns in size. |
| STAGE 4 |
REVERSE OSMOSIS MEMBRANE
The reverse osmosis membrane removes 98%-99% of dissolved solids including radium, nitrates, sodium, and heavy metals. The commercial grade reverse osmosis membrane produces very high quality drinking water. |
| STAGE 5 |
OPTIONAL CARBON BLOCK POST-FILTRATION
Prior to dispensing, a final 10 carbon block post-filter cartridge polishes the product water removing any remaining odors, taste and color. |
| STANDARD FEATURES |
|
- State-of-the-art engineering.
- One year warranty.
- Operating Pressure:800 psi
- Corrosion resistant built in feed water low pressure pump
- Built-in and dependable gasoline engine with high capacity fuel tank.
- Portable skid with advanced quick connect manifold systems for intake, reject and product water connection.
- Built-in heavy duty caster wheels with brakes
- High gloss, compact, heavy duty rugged and rust proof aluminum/stainless steel frame.
- Built-in feedwater strainer
- Heavy Duty Fiberglass membrane housing
- Corrosion resistant plunger type high pressure pump
- Corrosion resistant high pressure regulating valve
- Product water flowmeter
- Reject/brine flowmeter
- Liquid filled high impact dual pre-filter differential pressure gauges
- Liquid filled high impact high pressure gauge
- Factory tested and preserved before shipment
|
PRODUCT BASED ON THE FOLLOWING FEEDWATER CONDITIONS |
|
| Water TDS |
< 35,000 ppm |
| Water temperature |
25º Celsius |
Pressure |
> 10 psi |
110- or 220-Volt power |
|
| Membrane Specifications |
| Recovery
|
30% |
| Rejection |
8% Average |
Production over a 24-Hour Period |
| Model No. |
FQ
100 |
FQ
200 |
FQ
400 |
FQ
600 |
FQ
800 |
FQ
1000 |
FQ
1200 |
FQ
1600 |
FQ
2000 |
| GPD |
100 |
200 |
400 |
600 |
800 |
1,000 |
1,200 |
1,600 |
2,000 |
| Power (volts) |
220 |
220 |
220 |
220 |
220 |
220 |
220 |
220 |
220 |
| Weight (lbs.) |
75 |
89 |
108 |
118 |
132 |
42 |
155 |
160 |
205 |
| Length (in.) |
15 |
22 |
22 |
26 |
26 |
26 |
26 |
26 |
26 |
| Width (in.) |
23 |
24 |
24 |
18 |
18 |
18 |
18 |
18 |
18 |
| Height (in.) |
15 |
15 |
15 |
40 |
40 |
40 |
40 |
40 |
48 |
|
